Enter Into A Contract With A Heating System Repair And Service Contractor For The Coming Winter

Enter Into A Contract With A Heating System Repair And Service Contractor For The Coming Winter

Those of us who have these HVAC’s at home know the importance of its usage. It tends to protect us not only from chilling blues but scorching heat too. Since they perform dual role it becomes our responsibility to keep these systems fully functional in all seasons be it winters, summers or autumn. We cannot take the liberty to leave them unchecked for months because when the time falls due for their use we run after service contractors which charge handsome amounts for basic servicing. Hence, we must have a professional contractor ready for the purpose who should be just a call away for us and should charge reasonable amounts due to our annual partnerships with them.

Heating and air conditioning contractors, like the rest of us, make mistakes. They make mistakes that hurt performance and efficiency of the HVAC systems they install and maintain. They make mistakes that hurt their customers sometimes. And they make mistakes that hurt their businesses. Not all HVAC contractors work this way, of course, but the majority do. The good ones have successful businesses not only because they do good work for their customers, but they make more money by coming in and cleaning up the mess left by the sloppy contractors.

Following is a checklist to adhere by before selecting a heating system repair and service contractor and entering into contract with them:

1. Not understanding Combustion Safety

Select a contractor who is pro in his work as compared to the money minded ones. The problem is that most HVAC contractors don’t know much about back drafting of combustion appliances. Nor do they test for it. If you hire an HVAC contractor make sure he pays attention to the chimney smoke, as oil burners typically give off smoke when combustion problem arises. And this calls for a prompt repair as they can lead to more serious trouble and become expensive.

2. Burner Run Time Error

Make sure your HVAC contractor knows how an oil burner operates, they require electricity to run so, if the burner is not functioning the primary things to check are the shut off switch, circuit breaker or fuse. If they are on then press the reset button on the primary control once. Never to press reset button more than once as it can cause serious problems. These nitty gritties require professional attention.

3. Cycling Too Frequently

Burners normally cycle on and off numerous times during the day, but if the unit is continually cycling it may be a sign that the controls are not properly adjusted or, the filters have become clogged. Your professional should check your air filters and, depending on the model, replace or clean them if they’ve become clogged.

4. Focusing On ‘The Box’ And Ignoring Air Flow

select a contractor who not only changes the system but also changes the duct, because a professional contractor knows that the existing ductwork, even if it’s relatively new, probably wasn’t sized right, is too leaky, and would lead to more trouble and expense than just starting over.

5. Odor Emission

Oil heat systems should not emit odors. An odor can be a sign of an oil leak or of a combustion problem, both of which should be checked by the professional hired.

6. Each Home Is A New Home

for HVAC contractors each home should be a unique project with specific needs of rate of heat loss and heat gain. They should provide customized service to households they are working with and not follow principle of generalization or rule of thumb.

7. Lower Vs Higher Bidder

it is not necessary that higher bidder assure quality services nor is it necessary that lower bidder is your right choice to save money. The lower bidder will scrape on labor charges and quality of material thereby leaving house owner in loss. Think rationally and pay the right amount as “you will get, what you pay for”.

Thus, HVAC contractors must be chosen wisely, and should be maintained loyally so that they can prove to be useful in hard times to come.

Heating, Ventilation & Air Conditioning: Guide to Installation

Heating, Ventilation & Air Conditioning Guide to Installation

Buying a new central air conditioner is a major investment. Working with a skilled HVAC contractor, has its own benefits one can receive valuable guidance regarding system types, options, and efficiency levels available. The professional guidance will allow you to select the right central air conditioner for your home or business.

The installation of a new central air conditioning system should always be performed by a licensed professional HVAC installer. Attempting to install a new cooling unit without the proper training and knowledge can be dangerous. Improper installation can cause damage to the cooling system, as well as reduced efficiency – increasing the costs to cool your home.

If you’ve never had a contractor install a central air conditioner before, you will probably be unfamiliar with the process. Each HVAC process varies; the general steps consumers follow will be the same.

1. If your local government requires permitting for the HVAC work, either your contractor will obtain the permit or have informed you that you need to take care of it. In most cases, your contractor will do this for you.

2. The contractor takes apart and removes the existing air conditioner.

3. The contractor installs new duct systems or performs duct repairs.

4. Prepare the installation site. This may involve setting a concrete pad outside to support the air conditioner, or installing rooftop supports for a packaged system installation.

5. Your new outdoor unit will be positioned correctly. The contractor will install it and secure it to the site.

6. If you want to replace your air handler, install the indoor unit. While it’s a smart idea to replace both indoor and outdoor units at the same time, in some cases you may elect not to replace the air handler when you have a new outdoor unit installed.

7. Connect the indoor and outdoor units. The contractor will determine the appropriate size for refrigerant lines, drain piping, and electrical lines. Some of these components link the parts of the split system.

8. Connect the thermostat to the central air conditioner. You may have a new thermostat installed or continue to use your existing unit.

9. Pull a vacuum to remove contaminants from the refrigerant lines and charge the new central air conditioner with refrigerant.

10. The new cooling system starts and runs.

11. The contractor will perform an installation inspection to ensure the installation was done correctly and the system functions properly.

When it comes to installing an HVAC, some initial planning and prep work can help streamline the process. By surveying the general equipment layout and having professional help handy, labor time can be greatly reduced and a proper installation is guaranteed without any extra time, effort and costs.

How to maximize Lifespan and Efficiency of your Heating Machine/Heat Pump

 

How to maximize Lifespan and Efficiency of your Heating MachineHeat Pump systems operate on electricity, which can be produced with solar energy if you want to maximize your savings and they are ideal for homes in moderate climates. But the question arises, are they long lasting? The answer to this is simple- “they are not long lasting but their lifespan and efficiency can be maximized”.

1. Choose the right contractor - since it is a huge investment to make, think about the company wisely. Check their litigation history, paper work, online reviews, references and then make your final irreversible decision.

2. Check for warning signs - no matter how trusted a brand your HVAC is of, it won’t be immune to time or poor maintenance, even the most reliable equipment can break down, so check for early warning signs to avoid huge expenses. Warning signs like:

  • Leaking refrigerant or water.
  • Rooms in the home that aren’t cooling or heating the way they should, or the way that they used to.
  • Thermostat malfunctions.
  • Smells, particularly electrical smells, burning smells, or musty smells.
  • An unexpected increase in utility or fuel costs.
  • Frequent headache or nausea that may be a symptom of carbon monoxide from a furnace in need of immediate service.
  • Increased sensitivity to or presence of dust and allergens

3. Regular servicing - in a given year, your heating and cooling equipment does an extraordinary amount of work. Moving huge volumes of air in order to control your climate requires a lot of energy, and a lot of moving parts that experience a lot of wear and tear. Over time, degradation and damage is inevitable. So regular servicing and tune ups will work wonders for the longevity of your HVAC systems.

4. Keep changing your air filter - Filters are in the air handler, capturing dust and other particles so they don’t go flying around your house with the temperature-controlled air. If these aren’t cleaned or repaired frequently, they can lead to a whole slew of very serious problems, including:

  • Air restrictions
  • Overheating of furnace
  • Freezing of evaporator coils
  • Higher bills

5. Programmable Thermostats - programmable thermostats are the way to go. They allow you to avoid unnecessary heating, and they lower your utility costs. Best of all they help maintain even, regular ON/OFF cycles for your HVAC system, which keeps efficiency high. As an added bonus, many modern thermostats are wi-fi capable and allow you to control your home’s heating and cooling from any approved and connected mobile device, including your cell phone.

6. Keep the ducts checked - ensure that the ducts are laid out efficiently and in a way, that adequately and evenly distributes air to rooms in your home. They are properly sealed and insulated. They are clean and free of dust, mold, and bacteria.

7. Appropriateness of ceiling fans - these are not summer specific, but can be used in winters too to make your HVAC’s more efficient by circulating air in reverse direction so that heat trapped distributes quickly and evenly through your home.

A heat pump helps offset your heating needs, but it does not replace the need for primary heating like a furnace. However, it does eliminate the need for a window AC unit completely, and it can be used all year long due to its duel heating and cooling capacity. Efficiency is the key to longevity. All the afore mentioned issues tend to shorten the lifespan of the equipment. Simply by paying attention to owner maintenance like filter changes and vent cleaning, you can be a part of maintaining your system at peak performance levels.

Keep Your Heating System Ready To Protect Yourself From Chilling Blues

Keep Your Heating System Ready To Protect Yourself From Chilling Blues

If you are the one who waits for temperatures to drop, and do not think about the heater until it’s freezing. Then you need to pay immediate attention to your heating system now. And if you have children at home then you need to be extra cautious to keep them warm, safe and healthy as young children are less likely to recognize when they are cold and more likely to lose body heat quickly due to their smaller size. So, it is time to keep your heating system ready for action before the winter falls due. Following is the check list to keep yourself from chilling blues.

1. Have A Professional Service Your Heating System.  usually everyone’s heater sits in a basement, garage professional or closet, ignored until you turn on the thermostat and nothing happens. Unless your boiler or furnace is brand new, you should have it periodically serviced by professional to keep it running cleanly and efficiently.

2. Bleed Radiators And Change Filters. Most houses have either forced-air systems or hot water radiators.

If you have hot-water radiators, you probably know that you need to “bleed” them to let air out of the system at the beginning of the heating season. First, start the boiler and let it heat up, making sure the circulator pump is running. Open the valve on each radiator and have a container close by to catch the water. Once it’s water and not air coming out, close the valve. If you hear air come out and then it stops, but you don’t get water, close the valve and move on to another one, and then come back once the system has heated up more.

If you have a forced-air system, then you can improve its performance by making sure the filter in the furnace isn’t clogged. How often you need to change the filter will depend on your individual home and system. Check it every month or two until you have a sense of the right routine, then put future dates to change it in your calendar. There should be at least one large grille in the house, usually close to the furnace, that doesn’t blow out air — this is the return. Make sure to keep furniture and rugs away from this to keep air flowing.

3. Improve Efficiency And Save Money. Once the basics are in place, you can make your heating system function more efficiently by making it smarter. If you don’t have a programmable thermostat, it’s worth looking into one — they are relatively easy to install, and once you program the heat to come on when you actually need it, you won’t waste money heating an empty house. But be sure to find and purchase technology that you’ll actually use.

4. Keep It Moving. The ceiling fans of the house are meant for all seasons and are not summer specific. To distribute heat throughout the room, find the small switch on the main body of the fan that reverses the fan’s direction. When you don’t feel a breeze, that means the fan is blowing air upward, circulating air without cooling the room. Hot air trapped at the ceiling will be forced down along the walls. You’ll feel warmer, and the thermostat will be satisfied sooner, saving you money.

5. Be Safe. Since the furnace is often in the basement, it tends to coexist with our stuff. Things pile up, and someone may leave flammable items close to the heater’s pipe. Keep the area around the furnace clear so that it can both draw in air and exhaust properly and safely.

In addition to smoke detectors, you should have carbon monoxide detectors near bedrooms and the heater, ideally on every floor. Carbon monoxide is slightly less dense than air, and as it is usually warmer, will probably rise through the house, even to upper-level bedrooms. If you have a fireplace, have the chimney professionally cleaned. If you don’t use the fireplace, stop hot air from escaping out this large hole by using the flue damper or installing a chimney balloon. By applying any of these you are fit to fight the chilling blues.

When Does Your Air Conditioner Need Service?

When Does Your Air Conditioner Need Service?

Routine maintenance on your AC unit will save you headaches and money. So, when do you need air conditioning service? How often should you service your AC unit? Should you do it on your own or let the professional do the job?

Experts recommend air conditioning service once a year. Spring is definitely a great time. Nevertheless, to make sure that your system continues to work in an efficient manner, you have to do housekeeping regularly. One of the easiest and most important ways to keep your unit maintained is by changing the air filter. You do not require a professional. Just locate the filter slot of the unit, slide out old filter and insert a new one, making notes of the air flow direction and which side of the filter requires facing out. See to it that you refer to the instructions of the manufacturer for appropriate filter size and steps for replacing the filter properly.

Wondering which kind of air filter to buy and change? This depends on your lifestyle. Do you have some pets? Do you have kids with allergies? Every filter comes in different strengths. Basically, it depends on how filtered you like the air to be in your house. They also have to be changed at various times, depending on some circumstances. For example, if you have some pets, you might consider replacing that each month and buying a filter with high rating, the more air it will filter. The same rule applies once you have family members that might be sensitive to dust and some allergies. At minimum, the filters must be changed every ninety days.

Do A Bit Of Spring Cleaning

The new filter is in. Therefore, it is time to check some items off the list. First and foremost, ensure that all indoor vents are properly cleaned. Pour one cup of bleach combined with water down the outside unit’s drain to prevent algae and mold buildup. Make sure that the unit is on the level surface, has good amount of quality insulation around refrigerant lines, has at least two feet of clearance, and does not have debris including twigs, pollen, and leaves, clogging it up.

Evaluate The Performance Of Your AC

After you have assessed the air conditioner’s outside appearance, it is time to evaluate its performance. Crank your unit up and see how it fares. Determine if your house is getting cooler, once the unit is quiet and if this appears to be performing good. Just remember that once you turn on your air conditioning at home for the first time, you will notice a smell. This is simply the way of the air conditioner to clear out the dust that could have settled since the last time you use the unit. It must dissipate shortly.

It is important that you consider air conditioning service on a regular basis. You can do this on your own or you can always let the professionals do the job for you.