5 Reasons Your Air Conditioner Is Blowing Warm Air

5 reasons your air conditioner is blowing warm air

1. Thermostat problem :
The most common cause of hot air from your air conditioner is that the thermostat is switched to the heating mode. It happens to all of us. Sometimes thermostat is accidently switched to the heating from cooling mode. No need to worry in this kind of situation, just go and switch it to the cooling mode again and you are good to go.

2. Dirty air filters :
If your air conditioner’s thermostat is at cooling mode but you are still getting hot air from it, then the problem can be caused by the air filters. Air filters are used to filter the dust particles from the air of the air conditioner. But when those air filters are dirty enough that the air cannot pass through them, you usually get no air or comparatively hot air. To solve this issue, you just have to change the old filters with the new ones.

3. Refrigerant Leak :
Speaking of refrigerant leaks; this issue can cause your air conditioner to blow hot air too. Remember, refrigerant does not need to be refilled, so if there is a leak, you need to call a professional. Exposure to refrigerant can be dangerous for humans and pets, so be sure to act promptly.

4. Breaker Switch Is Blown :
There are multiple components that make up an air conditioning system, and if one stops working, the whole system can fail. If the breaker switch fails, it will halt power to the outside unit and impede the production of cool air. If this is the case, the first thing you should do is check the breaker and see if anything has tripped. If so, reset it and see if this remedies the problem. If the problem persists, it could be indicative of an underlying electrical issue, and you should call a professional electrician.

5. Condenser Coils (Outdoor Unit) :
If you’ve checked the thermostat, breaker box, air filter, and indoor coils, it’s time to go outside to inspect the outdoor unit. Just as the indoor evaporator coils need free airflow, so do the outdoor evaporator coils. That’s why it’s recommended to maintain a minimum 2-foot clearance around the outdoor condenser unit at all times.

6. Worn out compressor :
The compressor is the heart of your air conditioning system. Its function is to circulate refrigerant through a series of stages that allow it to remove heat from your system cabin. Similar to many other car parts, the compressor can wear out over time. Due to its complicated design, compressor failure can be attributed to contamination or other failed parts within the system.

There are some things that you can do to help prolong the life of your AC’s compressor. First, make sure to run the compressor for about 10 minutes once a month in the offseason, regardless of the temperature outside. This is easy to in most modern vehicles since they utilize the compressor when the defroster, which is used year round, is activated.

5 Ways Your Air Conditioner Service Provider Can Decrease Your Utility Bills

5 ways your air conditioner service provider can decrease your utility bills

If you are tired of paying huge amounts in terms of utility bills, then you are not alone. We all are facing the same problem, especially in summer when the sun is shining bright and our air conditioner is constantly working. A very common question that pop ups into everyone’s mind is that how can our air conditioner is affect so much on our utility bills? You will be surprised to hear that according to the statistics of US Department of Energy, air conditioning and heating make up about 43% of our utility bills. Just because of our air conditioner, we are consuming 43% more electricity. Insane! Right? To overcome this problem, it is necessary for you to call a service provider for the maintenance and service of your air conditioner. Your air conditioner service provider can decrease your utility bills just by checking these things.

Thermostat:

Programmable thermostats cut energy usage by adjusting temperatures while you’re away or asleep. You can program them yourself or purchase one that slowly adapts to your temperature preferences. Some can even be set up with an app away from home.

According to the Department of Energy, you can save up to 10% annually by adjusting your temperature by seven to ten degrees for eight hours a day. Programmable thermostats can automate the process. Therefore, always ask your air conditioner service provider to check the thermostat.

Replace your air conditioner’s air filters:

The most important maintenance task that will ensure the efficiency of your air conditioner is to routinely replace or clean its filters. Clogged, dirty filters block normal airflow and reduce a system’s efficiency significantly. With normal air flow obstructed, air that bypasses the filter may carry dirt directly into the evaporator coil and impair the coil’s heat-absorbing capacity. Replacing a dirty, clogged filter with a clean one can lower your air conditioner’s energy consumption by 5% to 15%.

Replacing the faulty AC Ducts:

Consider checking the ducts for torn insulation, partial blockages, disconnects, and holes. When there is a fault in the ducts, cool air does not move to the rooms in your home as efficiently as it should no matter how well your air conditioner may be working. This means that you are actually paying for air that is escaping, air that you never actually feel inside your house. Enlisting the services of professionals to get the ducts checked and fixed on a regular basis improves efficiency. In most cases, they will check the system for any mechanical faults and fix them to ensure optimal performance while saving on energy.

Coil Fins:

The aluminum fins on evaporator and condenser coils are easily bent and can block airflow through the coil. Air conditioning wholesalers sell a tool called a “fin comb” that will comb these fins back into nearly original condition.

Air Conditioner Coils:

The air conditioner’s evaporator coil and condenser coil collect dirt over their months and years of service. A clean filter prevents the evaporator coil from soiling quickly. In time, however, the evaporator coil will still collect dirt. This dirt reduces airflow and insulates the coil, reducing its ability to absorb heat. To avoid this problem, check your evaporator coil every year and clean it as necessary.

5 Ways To Lower Energy Bills With Air Conditioner Maintenance

5 ways to lower energy bills with Air conditioner maintenance

If you are receiving insanely crazy electricity bills lately then you are just like me. Yes! It is not a problem of a single person, almost all of us have the same issue. And you will be surprised to hear that according to the statistics of US Department of Energy, air conditioning and heating make up about 43% of our utility bills. Insane! Right? That is an average of $375 on our electricity bill due to the use of an air conditioning unit. But we cannot, however, do without an air conditioner especially during summer days when the temperature is very high. The only solution to this problem is through air conditioner maintenance. This will help you to achieve the perfect health of your air conditioning unit which will surely reduce the billing cost. Here are few air conditioner maintenance tips that will help you in achieving the perfect health for your air conditioner and will reduce your energy bills.

Install a programmable thermostat:
Programmable thermostats cut energy usage by adjusting temperatures while you’re away or asleep. You can program them yourself or purchase one that slowly adapts to your temperature preferences. Some can even be set up with an app away from home.

According to the Department of Energy, you can save up to 10% annually by adjusting your temperature by seven to ten degrees for eight hours a day. Programmable thermostats can automate the process.

Replace your air conditioner’s air filters:
The most important maintenance task that will ensure the efficiency of your air conditioner is to routinely replace or clean its filters. Clogged, dirty filters block normal airflow and reduce a system’s efficiency significantly. With normal air flow obstructed, air that bypasses the filter may carry dirt directly into the evaporator coil and impair the coil’s heat-absorbing capacity. Replacing a dirty, clogged filter with a clean one can lower your air conditioner’s energy consumption by 5% to 15%.

Replacing the faulty AC Ducts:
Consider checking the ducts for torn insulation, partial blockages, disconnects, and holes. When there is a fault in the ducts, cool air does not move to the rooms in your home as efficiently as it should no matter how well your air conditioner may be working. This means that you are actually paying for air that is escaping, air that you never actually feel inside your house. Enlisting the services of professionals to get the ducts checked and fixed on a regular basis improves efficiency. In most cases, they will check the system for any mechanical faults and fix them to ensure optimal performance while saving on energy.

Coil Fins:
The aluminum fins on evaporator and condenser coils are easily bent and can block airflow through the coil. Air conditioning wholesalers sell a tool called a “fin comb” that will comb these fins back into nearly original condition.

Air Conditioner Coils:
The air conditioner’s evaporator coil and condenser coil collect dirt over their months and years of service. A clean filter prevents the evaporator coil from soiling quickly. In time, however, the evaporator coil will still collect dirt. This dirt reduces airflow and insulates the coil, reducing its ability to absorb heat. To avoid this problem, check your evaporator coil every year and clean it as necessary.

Top Reasons Why Your Heating System Needs Servicing Before The Onset of Winter?

Top reasons why your Heating System needs servicing before the onset of winter?

Servicing your heating systems before winters has a lot of advantages. It will give you peace and genuine feelings of serenity since you’ll know that your family will be protected and warm throughout the winter season. Heating repair in Washington DC as well as Maryland is very essential as the weather in winters becomes so harsh. So, in case you live somewhere near such places then Riley Heat & Air rileyheatandair.com can help you in servicing the heating system.

Below are a few top reasons that prove that servicing the heating system is important before winters.

  • It will bring down your utility bills: Regardless of whether you heat your home with power, oil or even gas, a quick heating system servicing can hold your service charges within proper limits. Heat pumps work throughout the year to keep you in comfort, so they advantage from the servicing in the spring as well as fall. With a heater, the combustion segments should be checked before winter. The air handler that works with your heater and cooling gear likewise be serviced so it runs proficiently. So, if you want to keep yourself and your family warm while winters then you should quickly contract the best furnace repair in Washington DC.
  • Enhancing Heating Safety: Servicing the heating systems enhances the execution and unwavering quality of all heating systems, yet it’s particularly vital for heaters. Inadequate burning may cause security concerns, and it implies that the fuel you’re using isn’t being changed over to heat. Your HVAC expert should clean the burner, assess the heat exchanger and check the fuel line and vent pipe. You also need to test your smoke alarms along with the carbon monoxide detectors.
  • Improves the indoor air quality: Dirty filters increment vitality utilization and result in increasingly “no heat” issues than some other single contributor. A new or cleaned filter or legitimately working air cleaner will guarantee the appropriate flow of air through the hardware and all through the home, bringing about an all the more equitably heated home.
  • Keeps away from emergency maintenance: Air condition repair or furnace repair services are frequently very busy in the winter in finishing the last tune-ups and doing the emergency repairs. By planning the servicing before winter arrives, you can stay away from conceivable delays. You’ll have the capacity to get an arrangement at an advantageous time, and you won’t need to stress over your family experiencing a heating system breakdown.
  • Fire Risks: A despicably working heater with wrong gas pressure, old and dirty burners or inadequate controls of safety can bring about fire risks or extreme temperature risks that can harm the hardware or the house can even get on fire if these things are not checked or repaired. So, to avoid such risks, it is better to contact heating repair in Washington DC or Maryland as the weather there is very harsh in winters.

Things To Do To Prepare Your Heating System For The Winter Season!

Things to do to prepare your Heating system for the winter season!

The harsh climate conditions amid Washington DC winters can cause huge issues for your family if your heating system isn’t working at its best. Snowfall and cool winds undermine the lifespan of your system so it’s very essential that you proactively carry out the essential maintenance or look for a good service for heating repair in Washington DC to ensure that you heating system work well.

Below are some tips that can help you in preparing your heating system for winters.

  • Checking the heating system:
    Whatever heating system you depend on based upon where you live, it may be wood heaters, heating oil, or another heat source, you will surely don’t like it to break down in the winter, resulting in paying for emergency repairs. So first thing is to check it and make sure that it is in working condition if you really want to avoid issues in winters. However, if you don’t know how to check it properly then you can look for any services for furnace repair in Washington DC.
  • Installing a programmable thermostat:
    Once your heater is working appropriately, next thing is to proficiently control the heat that it gives out. Heating expenses can include rapidly, particularly in case you’re keeping your home at a high temperature while you’re not there. Maintain a strategic distance from this issue, and try to save energy by choosing an automatic or programmable thermostat. Several heating service in Washington DC are available that can help you in installation.
  • Replacing the furnace filters:
    On the off chance that you haven’t changed the filters of your heater or furnace since a couple of months, then it’s very important to do it now. An old or dirty filter is the most well-known reasons for breakdowns in heating units. A new filter will minimize expenses, air quality up, and your heating system will become stringer. In case you find it difficult then you can contact rileyheatandair.com in order to get the best furnace repair in Washington DC.
  • Sealing up the leaks:
    In order to assist your indoor heating system, ensure that the heat remains in by sealing up all the drafts that you may find around your doors or windows. For windows, you can use a caulk or an economical plastic window protection film to seal them.
  • Cleaning the furnace before using it:
    It is very important to clean your finance before using it otherwise it may cause problems because during summers when the heaters are not being used, the furnaces may get full of dust and dirt. So, it is important to clean all that dust if you want to make you heater work amazingly. You can also contact heating service in Washington DC for better maintenance of you heating system.

Did Your HVAC Contractor Give You a Maintenance Agreement?

Did your HVAC contractor give you a Maintenance agreement

Your heating systems should be looked up and maintained by experts to guarantee that they’re working effectively and without any serious issue. However, to get you work done, you also need to have a maintenance agreement with the contactor. If you have hired an air condition service or any heating service in Maryland but the contractor didn’t gave you a maintenance agreement then you should demand one by yourself as it is very important.

  • It will work as a reminder: Keeping track of all the different assignments around the house can be an extreme endeavour. Getting a maintenance agreement will lessen you duties as your HVAC contractor will fulfil all your HVAC maintenance needs without even reminding them. The agreement will work as a reminder and you have to do nothing but just wait for the contractor to provide best services.
  • Your heating or cooling system will last longer: Just like a complex machine, your home’s cooling, as well as heating units, require a specific measure of support to guarantee their parts don’t wear or glitch. Due to the maintenance agreement, you will get regular checkups of you heating as well as cooling systems which will let you system last longer. However, for the best furnace repair in Washington DC as well as air conditioning service in Washington DC, you can contact www.rileyheatandair.com
  • The agreement will help in keeping track of the systems’ maintenance history: A maintenance agreement with you contractor implies that tune-up, maintenance, and repair is reported and kept conveniently in the system. This encourages the contractor to monitor the health of your heating and cooling systems and will likewise keep them in the best condition. So, after an agreement you don’t need to do much work because your contractor will do it for you by providing the services without reminders.
  • You’ll Avoid Emergency Fixes: Life without heating or cooling in your home can be awkward or can be really risky. Try to solve minor issues at the time so that is doesn’t transform into real disappointments. The maintenance agreement will guarantee to solve all such minor issues at the right time and without any delay. So, if you have a maintenance agreement of any furnace or air conditioning service then you don’t need to worry about minor issues of your system.
  • You’ll Save Money: Along with the best maintenance of your system, avoiding emergency replacements and repairs, you will also save money if you have a maintenance agreement as you have to pay less amount of money within agreement.

So, if you want to contract a cooling or heating service in Washington DC or Maryland regions along with the maintenance agreements then www.rileyheatandair.com can prove to be the best one for you.

5 Signs That The Heating Furnace Needs an Upgrade!

5 signs your heating furnace needs an upgrade

A lot of times, people living in Washington DC don’t realize when their heating furnace needs an upgrade or a complete replacement. Below are 5 basic signs which will let you know when you need to contact furnace repair in Washington DC in order to upgrade, repair or service it.

1. The furnace is being used over 15 years:

The normal time span for a gas furnace is 18 years. But, you should change the one that is more than 15 years with an energy efficient furnace to save 15% of energy. Keeping an old furnace can decrease the heating temperature and it can cause other issues. So, it’s better to change a furnace after every 15 years. Hiring a furnace repair in Washington dc as well as Maryland is easy because Riley Heat & air (rileyheatandair.com) is always there to help you.

2. Your electricity bills and hardware repairs are relentlessly expanding:

An older furnace will undoubtedly work harder to provide the heat than it provided when it was new. This implies higher electricity bills and more incessant repairs. A slight increment in both of them is fine for an old furnace. Yet, once you start seeing great bill increments and your heater repairman knows you by name, it might be the time to upgrade your heating furnace.

3. The rooms of your houses have different temperatures:

An old and inefficient furnace can bring about a few rooms being colder or hotter than others. This is likely the sign of an old furnace and old duct system that is losing its capacity to disseminate heat equitably all through the house. In case you’re encountering some of these issues, don’t hesitate to get in touch with Riley Heat & air (rileyheatandair.com) which is providing services of furnace repair in Maryland or Washington dc.

4. Your home has ash around the registers.

An old heater may start regurgitating out dust, ash or even rust particles, which can be not just bothering for the individuals who want to keep a clean and tidy house, but it can also be risky for everybody’s health. When you notice some ash or rust around the heater or registers, this is a sign that your furnace has excess CO2. It can likewise cause extreme dryness, influencing all the house’s walls, wood ground surface, furniture, and plants. So, in the event that you see plants beginning to shrivel, or the family members are encountering dry eyes, headaches and irritated throats then you need to upgrade your furnace as soon as possible.

5. The furnace is making noise:

The furnace tends to make a little noise when they are turned on and off, however in the event that those little noises begin to get logically louder, it might be an ideal opportunity to upgrade your unit. These sounds may come as popping, slamming, murmuring, or shrieking. This could be an indication that you may need to contact Riley Heat & air (rileyheatandair.com) which is a furnace service in Washington dc, in order to replace your furnace or a few sections inside the heater.

Here’s What People of Washington DC are looking for in Air Conditioning Services

Here's what people of wastington DC are looking for in Air conditioning Services

Washington DC is one of the most influential places that can be found nowadays. The population that makes it up is one of the largest when it comes to product consumption and that is where most of the pilot market studies are carried out to determine if a product is good or bad. It is on this place where you can also observe the four seasons throughout the year and this leads all citizens to the need to use heating systems that work efficiently and guarantee their safety during any season of the year, either the cold winter or the very hot summer.

In this sense, the people of Washington have opted for a ventilation system for summer and fall to keep them cool enough and let them continue with their lives as normal during the office hours. They look for, in an air conditioning system, the possibility that this can be adapted to any space and that they themselves can choose the temperature in which it will work. The latter, in a few words, refers to the case of offices that work with a centralized ventilation system, but they would like to be able to place different temperatures in a specific area without affecting the other parts of the company, so that if at the reception they work with 24° in any other office they can place it at 16° if it is the person’s liking.

Another thing that is necessary for the users of any ventilation system in Washington is that they can handle it in a simple way. If the system uses a control that makes changing temperatures quite cumbersome, people will get tired of it and look for a system that is much easier to control. In this sense, try to make the air conditioning controllers digital and easy to access.

The simpler the process of managing a ventilation system is, the more love the users have for your product. Another thing that is looked for in the ventilation systems is a good guarantee since this gives the security to the people that they will be backed up in case anything happens, and the fact is that the company you bought from should be responsible in case something happens, breaks or needs repair.

On the other hand, users also need and seek, more than anything else, good technical advice. This is a service that only a few companies offer and consists mostly of when a problem occurs with the ventilation system, they send a certified technician who repairs it. These technicians are professionals in the area and are certified by different institutes and the majority has enough time working with heating systems so the quality of the workforce is fully guaranteed.

In this way, it has become clear that today’s users are looking for totally different things but, above all, they look for quality when working with a company, especially in a site as demanding as Washington DC.

10 Factors that Affect Heating Services in Washington DC

10 factors that affects heating services in washington DC

The heating services in Washington DC are one of the most important things that every space within every building or house should have. Thanks to them, it is possible to guarantee the comfort of people during any season of the year, especially winter. Although they are a necessity for people, heating systems have come to face problems especially in DC, so today we present 10 factors that affect heating systems in Washington DC.

1) Levels of demand from the public: Washington users have very high standards and seek services that can meet all their expectations.

2) Controls that are difficult to handle: Heating systems may have difficult controls that make it very hard to program the temperature so that is a problem of course.

3) Zero understandings to the user: Most heating systems are sometimes difficult for ordinary people to handle, so people need someone to help them when some doubt about how to use them is presented.

4) Errors when installing the system: If the heating system is not installed by a professional it can present problems from the beginning. You should worry about an expert installing your system and you will have guaranteed quality work.

5) Lack of Maintenance: If you do not take good care of your heating system, it will be damaged and you may not even know it. So try to make periodic checks so you always watch that everything is in perfect order. The lack of maintenance can be a serious problem.

6) Bad technical service: Users in Washington DC may be demanding as to who is going to repair something. So when the repair does not work they begin to reconsider their choice of heating systems.

7) Failed Advertising: Something that totally affects the heating systems and services is bad publicity. The ads help the client form a first impression about a business so be careful with this as some may be false advertising.

8) Not Suitable Spare Parts: If when you go to repair your heating system you do not get the right spare parts, it may be that the work that was done is not completely right since the spare parts will not be according to the brand and will not work well.

9) Customer Tracking: This is another challenge facing heating systems. Since it is not only to achieve the client’s satisfaction, they should buy the necessary things or repair the system. But you should also be aware of anything else that happens after any of the two previous processes.

10) High costs: Maintaining a good heating system can be costly enough to make people even think twice before purchasing a heating system, however today there are many ways to alleviate this concern since there are many saving methods so that the electricity bill is not so expensive.

So there you have it, 10 factors capable of directly affecting the heating system and causing them to fail in their time to help others. Go ahead to overcome all these obstacles and work hard with your heating system so that you get a better and warm place.

The Ultimate Homeowners Guide to Understanding HVAC System

The Ultimate Homeowners Guide to Understanding HVAC System

One of the most important things that a home should have is proper heating, ventilating and air conditioning system. Nowadays it is a necessity, which you must take care of immediately if you want to live with total comfort in your house. In addition, according to the climate of the place where you live, you will need a system that regulates the temperature inside each room and the best way to regulate it is using an HVAC System. Understanding all this, Riley Heat and Air has managed to optimize all the services they have been offering and today it presents a guide for this type of system. Surely everything will be easier now!

First of all, you should know that the HVAC System is an acronym for Heating, Ventilation and Air Conditioning. As such it is a system of temperature regulation for homes which has made life much easier for everyone. Thanks to them, both work and family environments are much more comfortable, productive and healthy.

In order to successfully manage an HVAC System, it is recommended to follow its respective manual first. If you are looking for a commercial installation, consult the manual ACCA N and if you want to install it in a home you must follow the Manual J. From these manuals, you can get a system that suits the size of the space in which you want your new system to operate.

The first advice we would like to give you is that do not exaggerate with size! Pay close attention to the dimensions of the space so that you acquire an adequate system and, thus, save you money at the time of installation.
Also, check that you have an energy recovery for the ventilation system. This way you can save a lot of money in terms of the electricity bill since your HVAC system will have an energy saving tool.

It is recommended that, in case you live in a place with a humid climate, your HVAC System has an additional dehumidifier and check that you have a programmable thermostat so that you can check temperatures every time you approach your system.

On the other hand, it is also considered a great tip to have a type of regulation system for Multiple Zones. Since if the space is very large and many people coexist in it, it may happen that the temperature needs are different for different type of people. With this type of system in each different space, people will be able to adjust the degrees and that will not affect those living in adjacent rooms.

Another type of control system is that of Demand or CO2 sensors. They have specific sensors that measure the level of CO2 expulsed into the air, which allows them to identify the number of people in the room and, therefore, they start to work with the temperature they think is necessary.

Now you know the basics of an HVAC System. Do you already know which one is right for you? Go buy yours now!